This article will walk you through the procedure to delete/remove cables on an OPIBLUE System
The only way to delete cables on a bin structure is by proceeding as follows:
- Unmap the corresponding cable node
- Unregister the corresponding cable node (make sure prior to unregister the node, to write down the pertinent information: mac address and PIN # as you are going to need it when re-registering the node)
- Refresh the browser for the changes to take effect
- Re-register the cable node (in this step you will need the information you wrote down: node's mac address and PIN #)
- Remap the cable node
- Re-associated the cables attached and detected by the cable node to the corresponding bin structures.
Note: by doing this, all historical data pertaining to the cable nodes that undergo this procedure will be lost.