How can I tell if the hardware I have is compatible with the new Grain Quality CO2 Sensor or not?

As the hardware is installed on a bin site, it isn’t always easy to access and look at the hardware to tell the difference; however, below shows the difference between the current Plenum Sensor and the new Grain Quality Sensor. (Fig. 4 & Fig. 5)

                             Fig. 4 – Current label on a Plenum Sensor             Fig. 5 - Updated label on a Grain Quality Sensor

The simplest way to tell if your hardware is compatible is to look in managegrain.com to validate the firmware versions pf applicable hardware.

1. Once logged in go to Gateways and Nodes under System Settings

2. By default, the system will show the Gateways.

3. To check the Gateway firmware.

4. Go to Nodes

5. To check Cable Node firmware.

6. To check Fan Node and Fan Node Radio firmware.