-
OPIsystems Support
-
StorMax
-
OPI Blue
-
Upgrade Procedures
-
Moisture Cable
-
Cable Node
-
Integris
-
OPI Blue Release Notes
-
Advanced Grain Management FAQs
-
Temperature Cable
-
Temperature/Moisture Cable
-
Plenum Pressure Sensor (PPOT)
-
Install Guides
-
OPI Partner and Install Certification Information
-
OPIsystems Internal Knowledgebase
-
CO2 sensor
-
Fan Control
-
BLUE Lite
-
Warranty
-
EPIQ
How do I Install the EPIQ WI-FI/LTE Antenna with the Locking Boot?
The antenna is a fragile piece of equipment that is susceptible to damage if not handled delicately and intentionally.
To install the antenna and locking boot:
- Make sure that the antenna is not already locked in place and then rotate the antenna to vertical upright position.
- Secure the first half of the antenna boot into position by aligning the "Top" indicator to vertical and sliding the "teeth" into the lock.
- Slide the second half of the antenna boot down the antenna and "click" it into place on the first half of the boot. TAKE CARE not to push the boot lock down without bracing the base of the boot and the antenna in order to avoid damaging the antenna!
Please view this video for a step-by-step visual guide on boot installation.