- OPIsystems Help Centre
- OPI Blue
- Fan Node Radio (FNR)
-
OPIsystems Support
-
StorMax
-
OPI Blue
-
Upgrade Procedures
-
Moisture Cable
-
Cable Node
-
Integris
-
OPI Blue Release Notes
-
Advanced Grain Management FAQs
-
Temperature Cable
-
Temperature/Moisture Cable
-
Plenum Pressure Sensor (PPOT)
-
Install Guides
-
OPI Partner and Install Certification Information
-
OPIsystems Internal Knowledgebase
-
CO2 sensor
-
Fan Control
-
BLUE Lite
-
Warranty
Troubleshooting a non working/communicating Fan Node Radio (FNR)
This article will walk you through the procedure on how to troubleshoot a non working/communicating Fan Node Radio (FNR)
Troubleshooting a FNR not communicating with gateway
- Check for power issues on the respective Fan Node Radio (FNR):
-
- Make sure there is +12 VDC ± 1 VDC between DCi+ and DCi- terminals on the Fan Node (FN) UNIT
- Make sure there is +12 VDC ± 1 VDC between DCo+ and DCo- terminals on the Fan Node (FN) UNIT.