![OPI_with_Tag_RGB_300dpi_3in_tall-1.png]](https://knowledge.opisystems.com/hs-fs/hubfs/OPI_with_Tag_RGB_300dpi_3in_tall-1.png?height=50&name=OPI_with_Tag_RGB_300dpi_3in_tall-1.png)
OPI ONE Manual
Older OPI temperature systems.
We do not have an OPI ONE user manual on file, but it is extremely simple to use:
- Plug in the cable readout at the input on your reader. The display will show the readings sensor by sensor.
- Use the navigation buttons to switch between sensors being displayed.
- The first sensor is the bottom one and then going up from there until it stops switching over when it gets to the top.
And that is it!