![OPI_with_Tag_RGB_300dpi_3in_tall-1.png]](https://knowledge.opisystems.com/hs-fs/hubfs/OPI_with_Tag_RGB_300dpi_3in_tall-1.png?height=50&name=OPI_with_Tag_RGB_300dpi_3in_tall-1.png)
CO2 sensor
- Why did OPI come out with a new Grain Quality (CO2) Sensor?
- How do I Retrofit a Plenum Grain Quality Sensor to an Existing OPI BLUE System?
- How do I Retrofit a Headspace Grain Quality Sensor to an Existing OPI Blue System?
- What is the CO2 Sensor Exchange Program?
- Can I connect a new Grain Quality (CO2) Headspace or Plenum Sensor into my existing Fan Node or Multi-Channel Cable Node?
- Can I connect a new Grain Quality CO2 Headspace or Plenum Sensor into my existing Fan Node or Multi-Channel Cable Node?
- How can I tell if the hardware I have is compatible with the new Grain Quality CO2 Sensor or not?
- What version of hardware firmware is required to be compatible with the new CO2 Sensor?
- Is it possible to update my existing Multi-Channel Cable Node and/or Fan Node with an over-the-air update to make it compatible with the CO2 sensor?
- What are the key hardware SKU’s I should be aware of when it comes to incorporating the Grain Quality CO2 into my OPI Blue system?
- Will there be alarms and alerts in my OPI BLUE system tied to the Grain Quality (CO2) readings?
- Where do I install the Grain Quality (CO2) Sensors?
- What level of accuracy can I expect with the Grain Quality (CO2) Sensor readings?
- How many parts per million (ppm) of CO2 is considered a “normal” level for grain in storage?
- Why should I add Grain Quality CO2 sensing, although I already have cables to monitor my grain in storage?